Print guide · September 23, 2026
Photo booth strip dimensions: 2×6 vs 2×8 explained
The short answer is 2×6 inches for the common printable photo strip. The useful answer depends on the file size, the paper you are using, and whether you want a classic long strip.
People often search for one photo booth strip dimension, then run into three different measurements: the finished strip, the photo paper, and the image file. They are related, but they are not the same thing. A photo booth strip can be 2×6 inches while the print shop processes it on a 4×6 sheet.
The common photo booth strip size is 2×6 inches
A 2×6 inch strip is narrow enough to feel like a traditional booth print and fits naturally on a standard 4×6 photo sheet. That is why it appears so often in photo booth print workflows. The 4×6 sheet is the carrier; the 2×6 strip is the piece you keep after printing and trimming.
| Format | Inches | Pixels at 300 DPI | Typical use |
|---|---|---|---|
| Photo strip | 2×6 | 600×1800 | Common booth print |
| Long strip | 2×8 | 600×2400 | Taller classic-style layout |
| Print sheet | 4×6 | 1200×1800 | Paper used by many photo services |
2×6 vs 2×8: which photo booth strip should you use?
Choose 2×6 when you want the easiest print workflow. At 300 DPI, the file is 600×1800 pixels, and two strips can fit across a 4×6 sheet before any printer margin or crop is applied.
Choose 2×8 only when the final physical shape matters more than convenience. It is a taller format, so a normal 4×6 print order may not preserve it without scaling, cropping or custom cutting. Do not stretch a 2×6 file to make it 2×8: the faces and frames will look distorted.
What size is a photo booth strip in pixels?
The conversion is simple: inches multiplied by DPI equals pixels. A 2×6 strip at 300 DPI is 2×300 by 6×300, which gives 600×1800 pixels. A 2×8 strip at the same resolution is 600×2400 pixels.
Pixels alone do not guarantee a good print. The image also needs the correct aspect ratio. A high-resolution file with the wrong ratio can still be cropped by a print service, so check the canvas dimensions before you upload it.
How to print a 2×6 photo booth strip on 4×6 paper
- Export the strip at its intended size instead of enlarging it later.
- Choose a 4×6 print option when the service asks for paper size.
- Keep the image ratio unchanged and turn off automatic “fit” cropping when possible.
- Print one test sheet before ordering several copies.
- Trim the sheet only after checking the frame, caption and outer border.
Public print services such as Walgreens Photo and CVS Photo show why the paper size deserves its own check: the service workflow is built around a print sheet, while your finished strip is a smaller design inside it. Their automatic cropping and margins can vary, so use the preview and test one copy.
Boothstrip's print-ready photo strip size
Boothstrip's Print size export is 600×1800 pixels, which is 2×6 inches at 300 DPI. You can create the strip from camera shots or upload existing photos, choose a layout, then download a PNG or JPG from the photo strip maker when you already have the images.
The practical rule is simple: keep the exported dimensions unchanged, print it on the paper size your service supports, and check the first result before making a batch. If you need a different physical ratio, create that ratio intentionally rather than stretching the finished file.
Sources used for this guide
Ready to make a print-ready strip?
Upload one to four photos, choose a layout and export a watermark-free strip for your next print order.